30 Color RGB LED Controller with RF Wireless Touchpad
Surface mount touchpad or install in-wall in an electrical box

Pro Series 30 Color
RGB LED Controller with
RF Wireless Touchpad


This RGB LED color controller is an easy-to-use device that comes with an RF wireless touchpad for both 12-volt DC and 24-volt DC RGB LED lighting. Use the touch controls to cycle forward or backward through 30 preprogrammed static colors, including shades of white, and 9 dynamic color-changing effects. The touchpad works through walls and doors up to 100 ft. away. Designed to look like a designer-style switch, the touchpad can also be wall mounted. Requires a 12-volt 23A battery, included.

  • One wireless touchpad can be programmed to control multiple areas of lighting (requires multiple controllers), or
  • Multiple sets will work independently without interference – providing multi-zones of lighting in the same area.
For each constant voltage power supply, a separate RF wireless RGB LED controller is required. For use only with low voltage LED lighting, do not connect to 120-volt AC current.


Out of stock

SKU: 713021 Category:

Product Description

  • 30 preprogrammed static colors, including shades of white
  • 9 dynamic color-changing effects
  • Adjustable brightness levels for static colors and certain effects
  • Adjustable speed for all color-changing effects
  • Can be programmed so that the touchpad and controller set can independently control separate zones of LED tape lighting without cross interference
  • One wireless touchpad can be programmed to control several controllers in unison for expanded same zone lighting control
  • Built-in memory, unit will remember last color or effect after powered off
  • Easy to wire using onboard screw-down terminal block connections
  • Wireless controls eliminate wire runs

Download Installation Guidelines

Colors & Effects

  1. Cool Bright White
  2. Pink
  3. Red
  4. Green
  5. Lemon Yellow
  6. Ice Blue
  7. Champagne White
  8. Light Blue
  9. Purple

  1. Sapphire
  2. Lime Green
  3. Pure White
  4. Light Purple
  5. Emerald Green
  6. Sunrise Yellow
  7. Natural White
  8. Lavender
  9. Goldenrod

  1. Kelly Green
  2. Arctic Blue
  3. Arctic White
  4. Sea Foam
  5. Purple White
  6. Blue Crystal
  7. Warm White
Color-Changing Effects
  1. Quick change flash: Red, Green, Blue
  2. Seven color quick change: Red, Green, Yellow, Ice Blue, Purple, Aqua, and White
  3. Pulsing dissolve Red, Green, Blue
  4. Seven color dissolve: Red, Green, Yellow, Ice Blue, Purple, Aqua, White
  5. White Strobe Flash, very slow or incredibly fast
  6. Red, White, Blue Cross Fade
  7. Green, White, Red Cross Fade
  8. Red, White Cross Fade
  9. Red, Green Cross Fade


  • Input voltage: 12-volt–24-volt DC
  • Output current: 12A (4A per RGB channel)
  • Max load with 12-volt DC lighting: 144 watts
  • Max load with 24-volt DC lighting: 288 watts
  • Working temperature: 55~140°F(13~60°C)
  • Wireless working frequency: 433.92Mhz
  • Battery: Alkaline 23A 12-volt
  • Listings: CE, RoHS, FCC, CSA
  • Receiver dimensions: 4-3/4 in. W x 3 in. H x 1 in. D
  • Touchpad dimensions: 2-3/4 in. W x 4-1/2 in. H x 5/8 in. D

Limited 2-year warranty. This product is for dry location use only. Improper installation, improper powering, abuse, or failure to use this device for its intended purpose will void warranty.