30 LEDs per meter, bright, wet location model available
Select multiple colorsChange the mood of any space with RibbonFlex Pro Custom Color Tape LightRibbonFlex Pro Custom Color Tape Light, 30 LEDs per meterRibbonFlexPro Custom Color Tape Light, 30 LEDs per meter, Wet Location

Custom Color RGB
LED RibbonFlex Pro
30 LEDs per meter

$6.60$184.99

Enhance surroundings with colorful, playful highlights or striking accents. Set a static custom color, including white, or create dynamic color-changing scenes and effects.

  • Well suited for ambient accent lighting
  • Perfect for adding color above cabinets, in coves and in tray ceilings, or for edge lighting counter tops and toe-kick areas

RibbonFlex Pro is easy to install in straight, curved and irregular spaces, offering virtually limitless design and installation possibilities. It can be cut to size every 4 in. or easily linked together to create longer lengths of lighting. Ultra thin and flexible, its low profile enables mounting in compact spaces. 3M high-bond adhesive tape backing makes positioning as easy as peel-and-stick.

The weatherproof/outdoor LED tape lighting works the same as the indoor model, however, the tape strip is encapsulated in an impermeable polyethylene sheath backed with a stronger, thicker, very-high bonding 3M peel-and-stick backing.  All connections must be soldered, and when cutting and connecting you must seal all connections and ends with the included adhesive-lined heat shrink tubing to ensure the tape light remains weatherproof.

By-the-Foot: RibbonFlex Pro tape light is available by-the-foot, but does not include wire leads, connectors or accessories. By-the-foot lighting is economical when added as a supplement to the 8.2 ft. and 16.4 ft. versions. Use a SureLock splice, corner, or wire lead connector to join the by-the-foot segments to your existing lighting.

 

Clear

Product Description

  • A 12-Volt DC LED power supply is required – see power supplies for options available
  • Requires a color controller to blend red, green and blue LEDs to create custom colors and automated color-changing scenes and effects
  • Ultra thin and flexible
  • Fully dimmable – see color controllers for options available
  • When set at 100% bright white this model produces about 200 lumens per meter
  • Can be cut every 100mm (~4 in.)
  • For RV and boat interiors, tape lighting can be powered directly by a 12-volt battery, AC/DC power supply not required
  • Contents by product length:
    • 8.2 ft. and 16.4 ft.: includes one SureLock wire-lead connector, one SureLock splice connector, two peel-and-stick wire support clips, wire leads at both ends of the strip, and instructions.
    • 32.8 ft and By-the-Foot: includes instructions. Does not include any connectors, wire support clips or wire leads.

Download Installation Guidelines
Download Wet Location Supplement

Specifications

  • Input Voltage: 12-volt DC
  • LED Count: 30 LEDs/m
  • LED Module: SMD 5050 tri-chip RGB
  • Beam Angle: 120° wide
  • Tape Height/Width: 2 x 10mm
  • Cuttable: Every 4 in. approx. (100mm)
  • Listings: CE, RoHS, CSA

Limited 3-year warranty. This product is for dry location use only. Improper installation, improper powering, abuse, or failure to use this LED tape light for its intended purpose
will void warranty. LED tape light cannot be returned or exchanged once cut
unless under warranty replacement.