White RibbonFlex Pro, 30 LEDs/meter, 270 lumens/meter, Standard Brightness
RibbonFlex Pro White Tape Light is great for above and below cabinetsRibbonFlex Pro White Tape Light, 30 LEDs per meterRibbonFlex Pro White Tape Light, 30 LEDs per meter

RibbonFlex Pro Series 30/270
30 LEDs per meter
270 lumens per meter

$15.77$71.99

  • Uses SMD 3528 LED modules – 30 LEDs per meter (about 9 LEDs per ft.) – to produce 525 lumens of light output per meter (about 80 lumens per ft.)
  • Extremely energy efficient for extra log runs in cove lighting applications
  • Economical solution delivers lower-level brightness illumination designed for indirect accent lighting projects such as above cabinets, coves, tray ceilings and toe kicks
  • Fully dimmable with standard in-wall dimmers when used with Armacost AC Dimmable Power Supplies
  • Also dimmable with Armacost Lighting’s line of 12-volt dimmers, wireless and Wi-Fi controls, (iOS and Android)
  • Series 30/270 tape lighting can be cut every 100mm (approximately every 4 in.)

View full product description

How to choose a power supply
Download Installation Guidelines

Clear
SKU: N/A Category:

Product Description

Indoor Tape Light Package include:

(Excluding 10 Meter Reels)

(2) Low-voltage power wire leads, 48-in. wire lead on one end, 8-in. wire lead on other end

(1) SureLock Wire Lead Connector for bridging gaps

(1) SureLock Splice Connector for extending tape strip lengths

(2) Peel-and-stick Wire Support Clips

(1) Detailed planning and installation guide

Outdoor Tape Light Package include:

(Excluding 10 Meter Reels)

(2) Low-voltage power wire leads, 24-in. each, pre-soldered and sealed to both ends of tape light

(1) Special waterproof wire lead Surelock Connector.

(1) Splice connector

(4) Clear adhesive-lined heat shrink tubing

(1) Detailed instructions

 

  • Requires a 12-volt DC power supply, sold separately. View options
  • Fully dimmable; the type of dimmer you choose will be based on how you want to connect and install your LED lighting. Read more
  • Fully customizable, cut to size every 4 inches (100mm) or easily connect strips together to create longer lengths; uses 3M high-bond adhesive backing for easy peel and stick installation
  • Tape height/width is about 2mm x 8mm (~1/8 in. X 3/8 in.), easy to hide and will fit almost any space – straight, curved or irregular
  • A typical 8 ft. length tape light has will use about 7 watts of power at 100% brightness, much less when dimmed
  • For RV and boat interiors, tape lighting can be powered directly by a 12-volt battery, AC/DC power supply not required
  • CSA logoCSA listed, conforms to UL standard 8750MFG,
    Class 2 NEC compliant, for dry location use only
  • Limited three-year warranty

Download Installation Guidelines

Approximate watts used per meter at full brightnessHow to calculate total wattage required in lighting system
Using the chart above, determine the watts used in each leg of lighting. A straight run is considered one leg. A center feed is two equal length legs of lighting. An array can have many legs. Include only the lengths of LED tape in your calculation, not the connecting wires.
Add together the watts used in each leg of lighting to get total watts required. Note: this is when lighting is at 100% full brightness and when it will use the most watts energy.
Maximum recommended tape length

Additional Information

Color Temperature

Warm White (3000K), Natural White (4000K)

Length

8.2 feet (2.5 meters), 16.4 feet (5 meters), 32.8 feet (10 meters)

Indoor/Outdoor

Indoor, Outdoor

Specifications

  • Series 30/270, Model RF35280360
  • Input voltage: 12-volt DC
  • Light source: 3528 SMD LEDs, 30 LEDs per meter (about 9 LEDs per ft.)
  • Light output: ~270 lumens per meter at 100% power (about 80 lumens per ft.)*
  • Power consumption: Typical 8.2 ft. (2.5 meter) length will use about 7 watts at 100% brightness
  • Tape height/width: 1.90mm X 8mm
  • Cuttable: Every 100mm (approximately 4 in.)
  • Color accuracy (CRI): ~80+
  • Beam angle: 120°
  • Lifespan: 50,000 hours based on IES LM-80-08 lumens maintenance testing
  • Listings: CE, RoHS, CSA. Conforms to UL standard 8750MFG, Class 2 NEC compliant; contains no mercury, emits no damaging ultraviolet/infrared (UV/IR) radiation
  • Limited 3-year warranty

*Luminous flux based on 1 meter (3.3 ft.) length spectrum testing. Voltage drop will reduce lumens output for longer lengths.

Download Installation Guidelines

X