12 Volt 30 led
RibbonFlex Pro White Tape Light, 30 LEDs per meterWhat you'll need… 1. Choose your lighting, 2. Choose your controller, 3. Choose your power supplyRibbonFlex Pro White Tape Light is great for above and below cabinetsRibbonFlex-White-lobby-curves-1000x1000RibbonFlex-living-room-tray-ceiling-1000x1000Ent. CenterCE-16ft-White-Tape-Light-Kit-kitchenMirrorColor temperatures: 2700K Soft White, 3000K Soft Bright White, 4000K Bright White

RibbonFlex Pro Series 30

Soft White-2700K, Soft Bright White-3000K, or Bright White-4000K

$26.29$109.99

  • Uses SMD 2835 LED Modules – 30 LEDs per meter (about 9 LEDs per ft.) to produce 400 lumens of light output per meter (about 125 lumens per ft.)
  • Economical solution delivers lower-level brightness illumination designed for indirect accent lighting projects such as above cabinets, coves, tray ceilings and toe kicks
  • Fully dimmable with standard in-wall dimmers when used with Armacost AC Dimmable Power Supplies
  • Also dimmable with Armacost Lighting’s line of 12-volt dimmers, wireless and Wi-Fi controls, (iOS and Android)
  • Series 30 tape light can be cut every 100mm (approximately every 4 in.)
  • Outdoor Series is weatherproof and suitable for both indoor and outdoor applications where water may come in contact with the tape. (Cannot be submerged)

View full product description


How to choose a power supply
Download Installation Guidelines
Download Wet Location Supplement

Clear

Product Description

 

Order by color temperature, reel length & location.

All lengths (except 10 meter reels) include:

(1) Series 30/400 LED tape light
(2) Low-voltage power wire leads, 48-in. wire lead on one end, 8-in. wire lead on other end
(1) SureLock Wire Lead Connector for bridging gaps
(1) SureLock Splice Connector for extending tape strip lengths
(2) Peel-and-stick Wire Support Clips
Detailed planning and installation guide

  • Requires a 12-volt DC power supply, sold separately. View options
  • Fully dimmable; the type of dimmer you choose will be based on how you want to connect and install your LED lighting. Read more
  • Fully customizable, cut to size every 4 inches or easily connect strips together to create longer lengths; uses 3M high-bond adhesive backing for easy peel and stick installation
  • Thinnest LED tape available at less than 1/16 in. thick and 3/8-in. wide, RibbonFlex is easy to hide and will fit almost any space – straight, curved or irregular
  • A typical 8 ft. length tape light has will use about 10 watts of power at 100% brightness, much less when dimmed
  • For RV and boat interiors, tape lighting can be powered directly by a 12-volt battery, AC/DC power supply not required
  • CSA logoCSA listed, conforms to UL standard 8750MFG,
    Class 2 NEC compliant, for dry location use only
  • Limited three-year warranty

Download Installation Guidelines

Soft white 2700K is similar to the color temperature of standard incandescent light bulbs, and produces a soothing, warm golden/yellow color.

Soft bright white 3000K is a little whiter, but is still warm, more like halogen light. It is a clean natural color and a popular balance between warm and cool white.
Bright white 4000K is a natural/neutral white, closer to the color of sunlight — not too cool and without a bluish tint.

Color temperature comparison: 2700K, 3000K, 4000K

Approximate watts used per meter at full brightness. RibbonFlex Pro Model 2835030 – 60 LEDs/meterHow to calculate total wattage required in lighting system
Using the chart above, determine the watts used in each leg of lighting. A straight run is considered one leg. A center feed is two equal length legs of lighting. An array can have many legs. Include only the lengths of LED tape in your calculation, not the connecting wires.
Add together the watts used in each leg of lighting to get total watts required. Note: this is when lighting is at 100% full brightness and when it will use the most watts energy.
Maximum recommended tape length – Model 2835030, 60 LEDs/meter

Additional Information

Color temperature

Soft White (2700K), Soft Bright White (3000K), Bright White (4000K)

Length

8.2 feet (2.5 meters), 16.4 feet (5 meters), 32.8 feet (10 meters)

Indoor or Outdoor

Indoor, Outdoor

Specifications

  • Series 30/400, Model RF283530
  • Input voltage: 12-volt DC
  • Light source: 2835 SMD LEDs, 30 LEDs per meter (about 9 LEDs per ft.)
  • Light output: ~400 lumens per meter at 100% power (about 125 lumens per ft.)*
  • Power consumption: Typical 8.2 ft. (2.5 meter) length will use about 10 watts at 100% brightness
  • Tape height/width: 1.05 mm X 8 mm (less than 1/16 in. X 5/16 in.)
  • Cuttable: Every 100mm (approximately 4 in.)
  • Color accuracy (CRI): ~80+
  • Beam angle: 120°
  • Lifespan: 65,000 hours based on IES LM-80-15 lumens maintenance testing
  • Listings: CE, RoHS, CSA. Conforms to UL standard 8750MFG, Class 2 NEC compliant; contains no mercury, emits no damaging ultraviolet/infrared (UV/IR) radiation
  • Limited 3-year warranty

*Luminous flux based on 1 meter (3.3 ft.) length spectrum testing. Voltage drop will reduce lumens output over longer lengths.

Download Installation Guidelines

X