White RibbonFlex Home LED Tape Light, 30 LEDs/meter, 270 lumens/meter, Standard Brightness
White RibbonFlex Home LED Tape Light – hallway accent lightingRibbonFlex Pro vs. RibbonFlex Home LED Tape LightingWhite RibbonFlex Home LED Tape Light – bedroom accent lightingWhite RibbonFlex Home LED Tape Light, 30 LEDs per meterWhite RibbonFlex Home LED Tape Light – bathroom accent lightingWhite RibbonFlex Home LED Tape Light, 30 LEDs per meter

RibbonFlex Home
30 LED/m Tape Light


  • Uses SMD 3528 LED modules – 30 LEDs per meter (about 9 LEDs per ft.) – to produce 270 lumens of light output per meter (about 80 lumens per ft.)
  • Extremely energy efficient for extra log runs in cove lighting applications
  • Economical solution delivers lower-level brightness illumination designed for indirect accent lighting projects such as above cabinets, coves, tray ceilings and toe kicks
  • Fully dimmable with standard in-wall dimmers when used with Armacost AC Dimmable Power Supplies
  • Also dimmable with Armacost Lighting’s line of 12-volt dimmers, wireless and Wi-Fi controls, (iOS and Android)
  • Series 30/270 tape lighting can be cut every 100mm (approximately every 4 in.)

View full product description

How to choose a power supply
Download Installation Guidelines


Product Description

Indoor Tape Light Package includes:

(Excluding 10 Meter Reels)

(2) Low-voltage power wire leads, 48-in. wire lead on one end, 8-in. wire lead on other end

(1) SureLock Wire Lead Connector for bridging gaps

(1) SureLock Splice Connector for extending tape strip lengths

(2) Peel-and-stick Wire Support Clips

(1) Detailed planning and installation guide

Outdoor Tape Light Package includes:

(Excluding 10 Meter Reels)

(2) Low-voltage power wire leads, 24-in. each, pre-soldered and sealed to both ends of tape light

(1) Special waterproof wire lead SureLock Connector

(1) Splice connector

(4) Clear adhesive-lined heat shrink tubing

(1) Detailed instructions


  • Requires a 12-volt DC power supply, sold separately. View options
  • Fully dimmable; the type of dimmer you choose will be based on how you want to connect and install your LED lighting. Read more
  • Fully customizable, cut to size every 4 inches (100mm) or easily connect strips together to create longer lengths; uses 3M high-bond adhesive backing for easy peel and stick installation
  • Tape height/width is about 2mm x 8mm (~1/8 in. X 3/8 in.), easy to hide and will fit almost any space – straight, curved or irregular
  • A typical 8 ft. length tape light has will use about 7 watts of power at 100% brightness, much less when dimmed
  • For RV and boat interiors, tape lighting can be powered directly by a 12-volt battery, AC/DC power supply not required
  • CSA logoCSA listed, conforms to UL standard 8750MFG,
    Class 2 NEC compliant, for dry location use only
  • Limited two-year warranty

Download Installation Guidelines

Approximate watts used per meter at full brightnessHow to calculate total wattage required in lighting system
Using the chart above, determine the watts used in each leg of lighting. A straight run is considered one leg. A center feed is two equal length legs of lighting. An array can have many legs. Include only the lengths of LED tape in your calculation, not the connecting wires.
Add together the watts used in each leg of lighting to get total watts required. Note: this is when lighting is at 100% full brightness and when it will use the most watts energy.
Maximum recommended tape length

Additional Information

Color Temperature

Warm White (3000K), Natural White (4000K)


8.2 feet (2.5 meters), 16.4 feet (5 meters), 32.8 feet (10 meters)


Indoor, Outdoor