For use with all Armacost Lighting 12-volt LED products:
- White RibbonFlex Pro LED Tape Lighting
- RGB Custom Color RibbonFlex Pro LED Tape Lighting (also requires an RGB color controller)
- LED puck and landscape lighting
10 Watt Standard 12-Volt DC LED Power Supply$13.99 Add to cartQuick View
20-Watt Standard 12-Volt DC LED Power Supply$17.99 Add to cartQuick View
30-Watt Standard 12-Volt DC LED Power Supply$29.99 Add to cartQuick View
48-Watt Standard 12-Volt DC LED Power Supply$37.99 Add to cartQuick View
60-Watt Standard 12-Volt DC$54.99 Add to cartQuick View
LED Power Supply
100-Watt Standard 12-Volt DC LED Power Supply$79.99 Add to cartQuick View
150-Watt Standard 12-Volt DC LED Power Supply$89.99 Add to cartQuick View
Standard Electronic Power Supplies are compatible with Armacost low-voltage dimmers only. Standard power supplies cannot be used with any 120-volt AC dimmer. For dimming using an in-wall Lutron-style dimmer, choose an 120-Volt AC Dimmable Power Supply. To learn more about dimming and what may be your best installation option based on your application, visit LED Dimming Basics.
Choose the appropriate power/wattage output
Standard Power Supplies are available in 8–150 watt models. The amount of power needed for your application is dependent on the watts required by your LED lighting. The watts required for each Armacost LED lighting product can be found in their associated installation guidelines. For RibbonFlex Pro LED tape lighting, the power or watts required depends on the brightness model as determined by LED density (number of LEDs per meter), the length of the lighting being installed, and the design configuration for your application. Read the installation guidelines for the LED light product you are using and choose a power supply rated greater than your needs – you cannot overpower LED tape lighting.
Still not sure which power supply is right for your project?
Visit our page on choosing a power supply.
View RibbonFlex Pro tape lighting wattage usage chart