2-in-1 LED Dimmer with RF Wireless Touchpad
Receiver installs in a standard switch box recessed into a wall with included designer-style insert plate. Standard designer switch face plate is not included.Surface mount touchpad or install in-wall in an electrical boxWireless Dimmer Touchpad in single switchplateBlends with existing switches and dimming décor

2-in-1 LED Dimmer
with RF Wireless Touchpad


The Armacost Lighting Wireless RF 2-in-1 LED dimmer provides remote switching and dimming of low voltage LED lighting and works through walls and doors up to 100 ft. away.  Using RF (radio frequency) technology, it eliminates the need to run wires from the LED lighting to the remote switch location, useful in situations where installing new cabling can be difficult. With this model you can use the rotary knob dimmer or the touchpad for 2-way switching and brightness control.

If you have more than one area to control and need two wireless RF 2-in-1 LED dimmers, you have options:

  • One wireless remote touchpad can be programmed to control multiple areas of lighting (requires multiple dimmers), or
  • Multiple sets will work independently without interference – providing multi-zones of lighting in the same area.

For each constant voltage power supply,  a separate wireless RF 2-in-1 LED dimmer is required.  For use only with low voltage LED lighting, do not connect to 120-volt AC current.

SKU: 513120 Category:

Product Description

  • Can be programmed so the touchpad and dimmer set can independently control zones of LED lighting without cross interference from another wireless dimmer system
  • One wireless touchpad can be programmed to control several dimmers in unison for expanded same-zone lighting control
  • Touchpad unit operates the same as regular 2-in-1 LED dimmer and can be surface mounted or installed into a standard switch box
  • The designer-style touchpad can be flush mounted into a wall or cabinet, operates using included 12-volt 27A battery
  • Dimming will reduce energy used and extends the life of LEDs
  • Smooth, 0-100% full range dimming
  • Easy quick-connect terminal block direct wire hook-up
  • Operates on 12-volt or 24-volt DC, not for use with 120-volt lighting fixtures
  • Will support a maximum load of 96 watts of 12-volt LED lighting or 192 watts of 24-volt LED lighting
  • CSA listed, conforms to UL Standard 8750

Download Installation Guidelines


  • Input voltage: 12-volt–24-volt DC
  • Output current: 8A
  • Max load with 12-volt DC lighting: 96 watts
  • Max load with 24-volt DC lighting: 192 watts
  • Working temperature: 55~140°F (13~60°C)
  • Wireless working frequency: 433.92Mhz
  • Battery: Alkaline 27A 12-volt
  • Listings: CE, RoHS, FCC, CSA
  • Dimmer dimensions:
    1-7/8 in. W x 2-7/8 in. H x 2-1/8 in. D
  • Touchpad dimensions:
    2-3/4 in W x 4-1/2 in. H x 5/8 in. D

Limited 1-year warranty. This product is for dry location use only. Improper installation, improper powering, abuse, or failure to use this device for its intended purpose will void warranty.